Best Creality Ender 3 Dual Extruder Upgrades (Pro/V2/S1)


Key Takeaways

  • Why upgrade to dual extruder: Dual extruders allow you to print with multiple filaments at once, creating multicolored and reinforced prints.
  • Mosaic Palette 3: A simple and expensive option that splices different filaments together without modifying your printer.
  • Chimera Project: A cheap and easy DIY mod that uses a printed mount and two nozzles to switch between filaments.
  • Cyclops Hot End: A similar mod that can also mix filaments together for more color variation.

Creality’s Ender 3 series is one of the most popular budget 3D printer lines on the market today. Beyond the unbeatable price, they’re easy to use, reliable, and quite powerful for their range.

But, because the Ender 3 range only comes with single extruders as standard, plenty of people (myself included) choose Ender 3 dual extrusion upgrades.

The best Ender 3 dual extruder upgrade for most people will be the Chimera Project. It’s the most straightforward DIY mod to install, offering a great balance between cost and ease of use.You can also opt for a Mosaic Palette 3 for multi-color filament splicing.

Creality Ender 3 Dual Extruder Upgrade
Top Picks

My Top Ender 3 Dual Extruder Upgrades

Mosaic Palette 3 / Pro

Chimera Project

Cyclops Hot End

Proper Printing’s Dual Extruder Ender 3 Mod

Table Of Contents
  1. Key Takeaways
  2. My Top Ender 3 Dual Extruder Upgrades
  3. Why Upgrade?
  4. Ender 3 Dual Extruder Options
    • Mosaic Palette 3 / Pro
    • Chimera Project
    • Cyclops Hot End
    • Proper Printing’s Dual Extruder Ender 3 Mod
  5. Upgrading Your Ender 3 To a Dual Extruder: Pros and Cons
    • Pros
    • Cons
  6. Before Installing a Dual Extruder on Your Ender 3
    • Be Safe and Sure!
    • Be Ready to Roll Up Your Sleeves
  7. FAQs
    • Can the Ender 3 Do Dual Extrusion?
    • Does Creality Make a Dual Extruder?
    • Are Dual Extruders Worth it?
    • Can the Ender 3 Print Multiple Colors?

Why Upgrade?

It adds the ability to print using more than one filament type at once, allowing multi-color projects and stronger, more reliable prints which require less post-processing.

There’s also the cost difference to take into account. Adding a dual extruder to your Ender 3 is significantly cheaper than simply buying a similar printer with a dual extruder already installed.

Remember – 3D printers with dual extruders as standard are normally around $600, over three times the price of a standard Ender 3.

Dual Extruder 3D Printer

So, how do you go about fitting your Ender 3 dual extruder? What should you take into account before getting started? And what are the best dual extruders out there for each Ender 3 model?

We’re going to answer all of these questions here.

Ender 3 Dual Extruder Options

The open-source community for the Ender 3 is huge, and there’s no shortage of people out there with cool ideas on how to modify and upgrade Ender 3 printers with laser engravers, improved frame guards, and even advanced touchscreens.

Because of this, it’s understandable to not know off the bat exactly which one is right for you. So here we’re going to look at some of the best and most reliable Ender 3 dual extruder upgrades you can check out today.

Mosaic Palette 3 / Pro

While technically more of an honorable mention than an actual Ender 3 dual extruder, the Mosaic Palette 3 and Palette 3 Pro are by far the simplest option to use your Ender 3 to make multicolored prints without needing to actively modify your printer.

Mosaic Palette 3 turns your Ender 3 into a multi-extruder able to print up to 8 different filaments at once

This is great news if you’re unconfident or otherwise unwilling when it comes to taking tools to your Ender 3, but still want to make prints using different colors and filaments.

The Mosaic Palette models act as automatic switchers, like changing the orientation of a railway line to divert specific trains or uncoupled carriages in different directions. The Mosaic Palettes act as changers that swap between up to eight different filaments per print and automatically manage each one.

Mosaic Palette 3 1

The downside is the cost. At around $700, they are not cheap machines. But if you’re not very handy and have the money to spend, this is the most streamlined way to attach what could be described as a ‘multi extruder’ to your Ender 3.

Chimera Project

The Chimera Project, named after the Greek concept of an animal amalgamation rather than an ideological improbability, is the first great example of a DIY dual extruder that was designed for the Ender 4 but is still compatible with all Ender 3 models.

Chimera Project Ender 3 dual extruder upgrade originallt designed for the Ender 4

A standard dual extruder that’s quite cheap to produce, the Chimera Project sits on a mount that you will need to print out yourself. While that sounds like extra steps, don’t discount how cool it is to use your 3D printer to make its own modification parts.

The instructions and necessary parts are all included and linked to in very clear detail on the project’s Thingiverse page here.

Safety precautions and recommended hardware are all laid out so even the most humble of beginners will have an easy enough time getting to grips with how it all works.

Regardless of your experience with DIY, this mode you’ll need to get this Ender 3 and 4 dual extruder up and running so long as you maintain caution and follow the instructions.

Chimera Project Dual Extruder

Cyclops Hot End

The Cyclops Hot End is a spiritual sibling of the Chimera. The two are usable with the same printed mount, and both can alternate between different filament colors and types mid-print. The Cyclops gets its name from the fact that it looks like a single extruder but has all the capabilities of a dual extruder.

As well as standard multi-filament printing, it can also mix filaments together. While it does act like more of a ‘filament management system’ than a standard dual extruder, it still performs all the functions you’d expect.

Cyclops Dual Extruder

The instructions and files, along with some hints for building and use, are all found for free here. This Cyclops seems to be a reliable and very simple way to convert your Ender 3 to have a dual extruder, unlike actual cyclopes, whose implied lack of depth perception would likely render them far less menacing than their mythology would have us believe.

Proper Printing’s Dual Extruder Ender 3 Mod

Proper Printing has developed a unique kind of dual extruder that doesn’t require a second servo. Instead, this very interesting and surprisingly clever design relies on a spring mechanism that allows the two extruders to switch use seamlessly by operating like a teeter-totter.

Creality Ender 3 Rocker Dual Extruder Upgrade 1

The extruders move in a sort of slanted V shape, with only the active extruder being parallel to the build while the other is slanted to the side while not in use. This allows extruders to be used with the same servo instead of either one spending any time-wasting space by simply waiting their turn.

This minimizes the amount of build volume lost by conserving space as well as parts in its design.

Known internally as ‘The Rocker’ and available as printable files for only $3 on their website here, it’s an absolute steal for something no Ender user should go without.

Rocker 2

While it is said to work on any standard Ender 3 model (that is, out of the box and since unmodified) it’s unclear as to whether it will function well with other 3D printers or more modern Creality Ender models.

Though since the $3 is for the files and instructions, you’re free to experiment and tweak to see if The Rocker does work with other 3D printers provided you’re confident and techy enough to do so.

You can even modify the design yourself if it doesn’t work right away with the model you have in mind, such is the beauty of mods!

Upgrading Your Ender 3 To a Dual Extruder: Pros and Cons

Upgrading your Ender 3 with a dual extruder may seem like a no-brainer. One is more than two, and therefore better. But, like most things relating to Ender 3 upgrades printers, it’s not quite as simple as it appears.

Dual extruders come with a host of benefits, but that’s not to say there aren’t drawbacks. While not a one-way modification (meaning you can go back to a single extruder if you want), installing an Ender 3 dual extruder only to then realize it wasn’t worth the hassle will be a waste of time, money, and effort on your part.

Safety 2

Equipping your Ender 3 with a dual extruder comes with some negative effects that, depending on your desired uses, may not be worth the effort after all. So be sure to keep these points in mind before deciding whether or not to break out your toolbox.


  • Print with more than one filament/filament type at once.
  • Multicolored prints are far easier and take less time because you won’t need to constantly switch your filaments mid-print.
  • You can reinforce your prints with dissolvable filaments like HIPS and PVA for better surface finishes.
  • Upgrading/modifying single extruder printers is often cheaper than buying dual extruder printers.


  • Dual extruders are unwieldy and difficult for beginners to handle and manage.
  • Unnecessary if you’re happy enough printing in one color.
  • Far more maintenance, care, and cleaning are required to keep a dual extruder clean and functioning properly.
  • Lower build area volume due to the larger extruder requiring more space.
Dual Extruder 1

Essentially, a dual extruder requires a lot more work and maintenance to use reliably than a single extruder. If you’ve got your sights on fortified and/or multicolored prints, then upgrading your Ender 3 with a dual extruder is a fantastic idea.

On the other hand, if you’re happy with monochrome prints or are otherwise not confident you could handle the upkeep, it might be best to stay with a single extruder.

Dual Extruder 1

However, if you’re willing to put in the work and are still convinced you want a dual extruder on your Ender 3 despite these cons, then we’re here to help you move forward.

Before Installing a Dual Extruder on Your Ender 3

Ender 3 models are equipped with single extruders by default. However, as we’ve seen with your options for adding laser engravers, they are highly modifiable machines. This means that, with enough know-how and effort, you can upgrade your Ender 3 with a dual extruder.

Be Safe and Sure!

There is no official dual extruder extension for the Ender 3, so you’ll need to get your DIY cap on. Just remember that you’ll be dealing with mechanical parts that are designed to get extremely hot, so make sure everything is switched off and unplugged before you begin.

In addition, remember that you’re working with moving mechanical parts, and will be manipulating them in ways for which they weren’t designed, like adding an extender cable to a standard outlet. So take the greatest of care to protect yourself and your machine while you work. Always double-check your equipment and instructions before beginning so you can move forward as confidently and safely as possible.

Safety Installing 3D Printer Dual Extruder

Modifiable as the Ender 3 is, be sure you take great care in upgrading yours. Removing and replacing parts must be done with care to ensure each piece functions correctly. An improperly installed extruder will back up or fail mid-print, which increases the risk of blockages, failures, and even fires.

Be Ready to Roll Up Your Sleeves

Any third-party modification to a device will require effort and know-how beyond what you’ll find instructions for in the box. User-guided, well-explained modifications will be much more reliable than selecting any old mod at random, but all will require at least some work on your end.

Work Hard

These upgrades are more often than not far more complicated than buying a new part and screwing it in, so be sure to read instructions carefully and carry out tests before you really put your new mod to use. Attention to detail and cautious handiwork are musts before you’re ready to plug in and get printing.

The main difficulty in installing your own dual extruder on an Ender 3 or any 3D printer is the requirement of an extra servo. While this isn’t the case for all dual extruders (we’ll get to that later) it is certainly the case for most, and the correct installation of said servo is very important and quite finicky.


Can the Ender 3 Do Dual Extrusion?

Yes – while the Creality Ender 3 ships as a single extruder 3D printer, it can be upgraded via several open-source projects and a few simple modifications.

Does Creality Make a Dual Extruder?

Creality does not sell a standalone dual extruder for specific 3D printer upgrades, though they do sell other add-ons for their printers such as laser engravers. However, they have sold 3D printers with dual extruders as standard, which they started with the CR-X Pro in 2018.

Are Dual Extruders Worth it?

Whether dual extruders are worth it depends on the user’s needs and preferences. Dual extruders allow for printing with multiple filaments at once and can produce multicolored prints more easily, but they require more maintenance and can reduce the build volume of the printer.

Can the Ender 3 Print Multiple Colors?

The Ender 3 can print multiple colors using a single extruder by changing filaments manually during the print, but dual extrusion would make this process easier and more efficient.

Other articles you may be interested in:

  • Ender 3 vs Ender 3 V2 vs Ender 3 Pro vs Ender 3 Max: Compared
  • Ender 3 vs Ender 5
  • Ender 3 Hot End Upgrades
  • The Best Direct Drive Upgrades for Ender 3


“Our printers don’t just print objects, they print ‘oops’, ‘ah-ha’, and ‘not again’ moments.”


Like it? Share with your friends!


Meet the mastermind behind GCode-Guru, a 3D printing wizard whose filament collection rivals their sock drawer. Here to demystify 3D tech with a mix of expert advice, epic fails, and espresso-fueled rants. If you've ever wondered how to print your way out of a paper bag (or into a new coffee cup), you're in the right place. Dive into the world of 3D printing with us—where the only thing more abundant than our prints is our sarcasm.


Your email address will not be published. Required fields are marked *

Choose A Format
Personality quiz
Series of questions that intends to reveal something about the personality
Trivia quiz
Series of questions with right and wrong answers that intends to check knowledge
Voting to make decisions or determine opinions
Formatted Text with Embeds and Visuals
The Classic Internet Listicles
The Classic Internet Countdowns
Open List
Submit your own item and vote up for the best submission
Ranked List
Upvote or downvote to decide the best list item
Upload your own images to make custom memes
Youtube and Vimeo Embeds
Soundcloud or Mixcloud Embeds
Photo or GIF
GIF format