November 30, 2023
This article has been reviewed according to Science X’s
and policies.
Editors have highlighted
the following attributes while ensuring the content’s credibility:
fact-checked
peer-reviewed publication
trusted source
proofread
by Jerry Grillo,
Georgia Institute of Technology
There are young children celebrating the holidays this year with their families, thanks to the 3D-printed medical devices created in the lab of Georgia Tech researcher Scott Hollister. For more than 10 years, Hollister and his collaborators have developed lifesaving, patient-specific airway splints for babies with rare birth defects.
Personalized Airway Support Devices are manufactured from a biocompatible polyester known as polycaprolactone (PCL). It’s a material recognized for its safety by the Food and Drug Administration. The creation process involves selective laser sintering, using heat to bond powdered polyester into a solid form.
Nonetheless, PCL is not entirely perfect. Its rigidity and linear properties have limited its use in certain biomedical needs such as soft tissue engineering. Despite being a thermoplastic, it lacks flexibility and the potential to grow alongside the patient. However, Hollister’s lab has found a way around this.
“The solution lies in 3D auxetic design,” said Jeong Hun Park, a research scientist at Hollister’s lab. The team has successfully demonstrated the 3D printing of PCL for soft tissue engineering. Auxetic materials behave inversely to most common elastics due to their negative Poisson’s ratio. They expand laterally when stretched, unlike most materials which thin out due to a positive Poisson’s ratio.
Therefore, an auxetic structure has the capacity to expand in both directions. This property is vital for biomedical applications in humans since our bodies and parts evolve in size and variety of textures and densities over time. Hollister’s team has successfully bestowed these auxetic characteristics onto the traditionally rigid PCL.
“Although the mechanical properties and behavior of the 3D structure depend on the inherent properties of the base material—in this case, PCL—it can also be significantly tuned through internal architecture design,” explained Park.
Park guided the design of 3D-printed structures made up of tiny struts, arranged at right angles—imagine the bones of very tiny skyscrapers. The team began by creating cube-shaped structures first, to test the auxetic design’s flexibility, strength, and permeability.
The work is published in the journal Advanced Functional Materials.
Essentially, an auxetic material is a network structure designed by assembling unit cells. These unit cells consist of struts and their intersecting joints, which are an essential aspect of an auxetic device’s behavior. The rotation of those intersecting joints within the network, under compression or extension, causes negative Poisson’s behavior. It also enables advanced performance for a printed device, including impact energy absorption, indentation resistance, and high flexibility.
“When you look at the numbers, based on Jeong Hun’s work, the new structure is about 300 times more flexible than the typical solid structure we make out of PCL in our lab,” said Hollister, professor in the Wallace H. Coulter Department of Biomedical Engineering at Georgia Tech and Emory University, where he also holds the Patsy and Alan Dorris Chair in Pediatric Technology and serves as the department’s associate chair for translational research.
The combination of flexibility and strength in a device is particularly important here, Park said, because the ultimate goal of the research is to “apply this structure to develop a breast reconstruction implant that has comparable biomechanical properties to native breast tissue. Currently, we don’t have a biodegradable breast implantation option in the clinical setting.”
He explained that these biodegradable breast reconstruction implants serve as a kind of scaffold. The idea is, the biocompatible material (PCL) eventually degrades and is absorbed into the body, while maintaining similar mechanical properties to native breast tissue.
“We expect that native tissue will be first infiltrated into the pores of the biodegradable implant,” Park said. “Tissue volume will then increase within the implant as it degrades and eventually the device itself is replaced with the tissue after complete degradation of the implant.”
Essentially, the 3D-printed breast implant is designed to provide reconstructive support while also facilitating the growth of new tissue.
The space between those tiny struts makes all the difference for the larger device, giving it a softness and pliability that would have been impossible otherwise. Those spaces eventually can be filled with hydrogel that will help foster cell and tissue growth.
The team’s architected auxetics also include the design of inner voids and spaces inside the struts, creating a kind of microporosity that enables the mass transport of oxygen, nutrients, and metabolites to nurture the expansion and growth of a cellular network.
Park is working with Emory surgeon Angela Cheng in submitting a grant for further research and testing of the breast implant. And the team already is adapting the technology for other applications. One of the collaborators in this research, for example, is Mike Davis, whose lab at Emory is focused on cardiac regeneration.
“Because of the great flexibility, they’re using it to reconstruct infarcted or necrotic myocardial tissue,” Hollister said.
And Park has developed an auxetic version of the pediatric tracheal splint. “The advantage there is, with this design, it can expand in two directions,” he said. “So, as young patients grow, the new device will grow with them.”
More information: Jeong Hun Park et al, 3D Printing of Poly‐ε‐Caprolactone (PCL) Auxetic Implants with Advanced Performance for Large Volume Soft Tissue Engineering, Advanced Functional Materials (2023). DOI: 10.1002/adfm.202215220
Journal information:Advanced Functional Materials
Provided by Georgia Institute of Technology
7 hours ago
0
8 hours ago
0
9 hours ago
0
9 hours ago
0
9 hours ago
0
1 hour ago
1 hour ago
1 hour ago
2 hours ago
2 hours ago
2 hours ago
3 hours ago
3 hours ago
3 hours ago
3 hours ago
May 6, 2021
Mar 5, 2021
Jan 3, 2018
Oct 18, 2021
Dec 4, 2019
Sep 11, 2023
7 hours ago
8 hours ago
8 hours ago
Nov 29, 2023
Nov 29, 2023
Nov 29, 2023
“Why did the 3D printer go to therapy? Because it had too many layers of unresolved issues!”
0 Comments